The Snapdragon 610 is a processor mainly used in the high-end mobile phones on the market. This Snapdragon is powered by a Quad-core ARM Cortex A53 with up to 1.7 GHz per core. This is mainly used in telephones where they use high-end cameras. This you can also see by its use of the Adreno™ 405 GPU and its ability to use cameras up to 21 MegaPixels.
Table of Contents
Snapdragon 610
The communication options are also very high in specs such as the ability of its 3rd Generation integrated LTE modem as well as Integrated 4G LTE World Mode and CAT4 speeds of up to 150 Mbps. The WiFi is a Qualcomm® VIVE™ 1-stream 802.11n/ac (2.4/5GHz) with MU-MIMO Integrated digital core.
The camera processing abilities are also rated at 1080p60 playback H.264 (AVC) and H.265 (HEVC) formats as well as 1080p30 capture with H.264 (AVC). To boot the display abilities for the camera is very impressive with up to WQXGA (2560×1600). Finally the memory is much faster than the Snapdragon 410 being LPDDR3 800MHz Single-channel 32-bit (6.4GBps).
See this website for which camera phone uses the Snapdragon 610. See the basic specs below. If you want more information then visit the Qualcomm website for a PDF download with the full specs.
Snapdragon 610 Specifications
| Processing | Quad-core ARM Cortex A53 at up to 1.7 GHz per core |
| GPU | Qualcomm Adreno 405 GPU |
| DSP | Hexagon V50 DSP (up to 700MHz) Shared Modem & App DSP |
| Modem | Integrated 4G LTE World Mode, supporting LTE FDD, LTE TDD, WCDMA (DC-HSPA+, DC-HSUPA), CDMA1x, EV-DO Rev. B, TD- SCDMA and GSM/EDGE CAT4 speeds of up to 150 Mbps 3rd Generation integrated LTE modem, with support for LTE-Broadcast and LTE multimode multi-SIM (TSTS, DSDA and DSDS) |
| RF | 3rd gen power efficient LTE multimode transceiver with Qualcomm RF360™ Front End solution for world mode bands, lower power and PCB reduction |
| USB | USB 2.0 |
| Bluetooth | BT4.0 Integrated digital core |
| WiFi | Qualcomm VIVE 1-stream 802.11n/ac (2.4/5GHz) with MU-MIMO† Integrated digital core |
| GPS | Qualcomm IZat Gen8C |
| NFC | Supported* |
| Video/Audio | 1080p60 playback H.264 (AVC) and H.265 (HEVC) formats 1080p30 capture with H.264 (AVC) DASH is supported |
| Camera | Up to 21MP |
| Display | Up to WQXGA (2560×1600) |
| Quick Charge | Qualcomm Quick Charge 1.0 technology, 1.5A out, Integrated Fuel Gauge Qualcomm Quick Charge 2.0 technology, up to 3A out, Current Path |
| Memory/Storage | LPDDR3 800MHz Single-channel 32-bit (6.4GBps)/eMMC 4.51 SD 3.0 (UHS-I) |
| Process Technology | 28nm LP |
| QRD | QRD supported |
Specification Summary
The device is powered by a Quad-core ARM Cortex A53 processor that can run at speeds of up to 1.7 GHz per core. It uses a Qualcomm Adreno 405 GPU for graphics and a Hexagon V50 DSP (up to 700MHz) for digital signal processing. Likewise see also the Snapdragon 410 as well as the Snapdragon 200.
The device features an Integrated 4G LTE World Mode modem, supporting various network technologies including LTE FDD, LTE TDD, WCDMA (DC-HSPA+, DC-HSUPA), CDMA1x, EV-DO Rev. B, TD- SCDMA and GSM/EDGE. It can reach CAT4 speeds of up to 150 Mbps. The modem also supports LTE-Broadcast and LTE multimode multi-SIM (TSTS, DSDA and DSDS).
3rd Generation CPU
The device uses a 3rd generation power-efficient LTE multimode transceiver with Qualcomm RF360 Front End solution for world mode bands, lower power and PCB reduction. It has a USB 2.0 port and supports Bluetooth 4.0. For wireless connectivity, the device uses Qualcomm VIVE 1-stream 802.11n/ac (2.4/5GHz) with MU-MIMO. It also features Qualcomm IZat Gen8C for GPS functionality and supports NFC. Likewise also see the Qualcomm Snapdragon 675 as well as the articles on the MediaTek Helio G Series.
The device supports 1080p60 playback in H.264 (AVC) and H.265 (HEVC) formats and 1080p30 capture with H.264 (AVC). DASH is also supported. It can support a camera of up to 21MP and a display of up to WQXGA (2560×1600). The device uses Qualcomm Quick Charge 1.0 technology with 1.5A out and an Integrated Fuel Gauge. It also supports Qualcomm Quick Charge 2.0 technology, with up to 3A out and a Current Path.
The device uses LPDDR3 800MHz Single-channel 32-bit memory/storage with a speed of 6.4GBps. It also supports eMMC 4.51 and SD 3.0 (UHS-I). The device is built using 28nm LP process technology and supports QRD. Likewise see also the article on the Nokia Lumia 735 Manual as well the Qualcomm Snapdragon 425.
